Exact pricing depends on square footage, slab condition, moisture mitigation, coating system, and prep (grinding, crack repair, old coating removal). Request a free quote after a look at your slab — published per-square-foot ranges can differ from what a local installer charges.
Matching the System to the Space
Auto & repair shops
Chemical- and oil-resistant coatings with texture for traction around lifts and wash areas.
Warehouses & storage
Abrasion-resistant coatings for forklift and pallet-jack traffic, with line striping for aisles and safety zones.
Retail & showrooms
Decorative flake or metallic finishes that look sharp and clean up fast.
Kitchens & food service
Seamless, sanitary surfaces. Some areas call for urethane cement systems that handle hot washdowns. Ask the installer.
Offices & common areas
Durable, low-maintenance floors for lobbies, hallways and break rooms.
Gyms & schools
Slip-resistant textures and colors that hold up to constant foot traffic.
Keeping Downtime Low
Fast-cure polyaspartic systems and phased installs can keep a business running. One section gets done at a time, or work happens over a weekend or overnight. Discuss your schedule up front so the installer can plan the system around it.
What Commercial Floors Need
Commercial and shop floors face more traffic, heavier loads, more chemicals and stricter safety expectations than home garages. A good commercial system is chosen for the actual use: forklifts, pallet jacks, solvents, food-grade cleaning, or showroom appearance.
Slip Resistance and Safety
OSHA's walking-working surfaces standard (29 CFR 1910.22) requires employers to keep floors clean, orderly and, as far as possible, dry, and to keep them free of hazards. Coatings can add aggregate for traction. The right texture balances slip resistance with cleanability. Safety striping and color zones can also be built into the floor.
Types of Commercial Spaces
Auto shops and garages
Chemical resistance to oils, brake fluid and solvents, and hot-tire resistance.
Warehouses
Abrasion and impact resistance for forklifts, with joint treatment.
Showrooms and retail
Appearance, reflectivity and easy cleaning.
Gyms and fitness
Impact resistance and slip resistance, often with mats.
Joints and Cracks
Commercial slabs have control joints and sometimes significant cracking. Joints may need semi-rigid fillers for forklift traffic. Moving cracks need appropriate treatment so the coating doesn't crack over them.
Scheduling Around Operations
Downtime costs money. Fast-cure polyaspartic and polyurea systems can shorten closures; phased installs let parts of a building stay open. Ask about night and weekend work and how long each area must stay closed.
Moisture and Old Coatings
Commercial slabs may have old coatings, sealers or curing compounds and may have moisture issues. Testing and full removal by grinding or shot blasting, to the surface profile ICRI guidance describes, prevents failures.
Ventilation and Occupants
Coatings can release VOCs while curing (EPA). In occupied buildings, plan ventilation and schedule so workers and customers aren't exposed.
Costs
Exact pricing depends on square footage, slab condition, moisture mitigation, coating system, and prep (grinding, crack repair, old coating removal). Request a free quote after a look at your slab — published per-square-foot ranges can differ from what a local installer charges.
Hudson Valley Businesses
Common projects in Orange and Rockland counties include auto repair shops, small warehouses near I-84 and Route 17, fire and ambulance bays, retail backrooms, and gyms. Winter salt brought in by vehicles is a recurring problem for bays and loading areas.
Food Service and Clean Spaces
Kitchens, food prep areas and some healthcare spaces often use specialized systems such as urethane cement, which tolerates heat, thermal shock and frequent washdowns better than standard epoxy. Health inspectors look for smooth, cleanable, nonabsorbent floors in these areas. Tell the installer how the space is used and cleaned so they can recommend an appropriate system.
Fire Stations and Emergency Bays
Apparatus bays take heavy trucks, hot tires, diesel exhaust residue, and winter salt. They benefit from thick, chemical-resistant systems with slip-resistant texture, and from scheduling that keeps the station in service, often by doing one bay at a time.
Warranty and Documentation
For commercial projects, ask for product data sheets, safety data sheets (SDS) for each material, the installer's warranty terms, and a written scope of preparation. Keep these with your facility records; they help with maintenance, insurance questions and future recoating.
Maintenance Programs
Commercial floors last longer with routine cleaning using compatible cleaners, prompt spill cleanup, and periodic inspection for wear in high-traffic lanes. Many systems can be recoated with a fresh topcoat after light abrasion, rather than being fully replaced, if wear is caught early.
Questions to Ask
- What system do you recommend for our traffic and chemicals, and why?
- How will you prepare the slab and treat joints?
- What's the downtime per area?
- What texture will give us slip resistance we can still clean?
- What does the warranty cover?
Choosing a System by Use
Epoxy systems are economical and build thickness, making them common in warehouses and shops. Polyaspartic and polyurea systems cure faster and resist UV, useful where downtime matters or sunlight reaches the floor. Urethane cement handles heat, thermal shock and washdowns in kitchens and food plants. Decorative flake and metallic systems suit showrooms and lobbies. Many projects combine them, for example an epoxy body coat with a polyaspartic topcoat.
Color and Line Striping
Color-coded zones and striping for walkways, forklift lanes and storage areas can be built into the floor, which lasts longer than painted lines on bare concrete. Light colors improve brightness and can reduce the lighting needed to see well, a common reason warehouses choose light gray coatings.
Preparation at Commercial Scale
Large slabs are usually prepared with ride-on grinders or shot blasters connected to industrial dust collection. Oil-soaked areas in shops may need degreasing and repeated grinding. Old coatings, adhesives and curing compounds must be removed. Joints, cracks and spalls are repaired before coating. Moisture testing across multiple locations matters on large slabs, since vapor levels can vary from one area to another, especially in older buildings without vapor barriers.
Getting an Accurate Quote
Share the square footage, how the space is used, the chemicals and loads involved, any existing coating, and your scheduling constraints. A site visit lets the installer check slab condition and moisture. Itemized quotes make it easier to compare bids on equal terms.
Winter Salt in Bays and Entrances
In Orange and Rockland counties, vehicles bring salt and slush into bays and loading areas all winter. Coated floors keep brine from soaking in, and entrance matting systems catch much of it before it spreads through a building.
Recoating Instead of Replacing
When a commercial coating starts to dull or wear in traffic lanes but is still well bonded, it can often be lightly abraded and given a fresh topcoat. That costs far less than full removal and replacement and causes less downtime. Scheduling a topcoat before wear reaches the base layers is the key, so inspect high-traffic areas at least once a year.
Sources
- OSHA, Walking-Working Surfaces, 29 CFR 1910.22
- International Concrete Repair Institute, Guideline 310.2R: Concrete Surface Preparation (CSP profiles)
- US EPA, Volatile Organic Compounds' Impact on Indoor Air Quality
- Angi, How Much Does Epoxy Flooring Cost? (2026)
- The Garage Guide, Polyurea & Polyaspartic Garage Floor Coating Cost (2026)
Questions
Can you work while we're closed?
Many installers can schedule nights, weekends or phased work. Mention your hours when you call so availability can be confirmed.
What about safety and slip resistance?
Texture additives, flake and the right top coat can improve traction. Your installer can recommend a finish suited to wet or oily areas.
Can you coat while we stay open?
Often in phases, with fast-cure systems and off-hours work. Plan closures with the installer.
What makes a commercial floor slip-resistant?
Aggregate broadcast into the coating adds texture. The amount is chosen to balance traction and cleanability.
Can coatings handle forklifts?
Yes, with thicker systems, proper prep and joint treatment.
Do we need to remove the old coating?
Usually, if it's failing or poorly bonded. Grinding or shot blasting to a proper profile ensures adhesion.
How long does a commercial floor take?
Depends on size, prep and system. Fast-cure systems can return areas to service in about a day.
Do you provide safety data sheets?
Ask for SDS for every material used. Reputable installers provide them along with product data sheets.
Can you add line striping?
Yes. Striping and color zones can be built into the coating system.
Is epoxy or polyaspartic better for a warehouse?
Epoxy is economical and builds thickness for forklift traffic; polyaspartic cures faster and resists UV. Many warehouse systems use an epoxy body coat with a polyaspartic or urethane topcoat.
How do you keep dust down in an occupied building?
Grinders and shot blasters are connected to industrial vacuums with filtration, and work areas are sectioned off. Ask the installer about their dust control plan.
Can a coated floor help with OSHA compliance?
OSHA's 29 CFR 1910.22 requires floors to be kept clean and, as far as possible, dry and free of hazards. A cleanable, slip-resistant coating helps, but housekeeping and maintenance still matter.
Related Services
Garage Floor Coatings
Full-broadcast flake systems over ground concrete. Slip-resistant, easy to clean, built for salt and slush.
Learn more →Epoxy Floor Coatings
Durable, economical epoxy systems for garages, basements, workshops and light commercial space.
Learn more →Polyaspartic Floor Coatings
Fast-curing, UV-stable coatings, often used as one-day garage systems or as a top coat over epoxy.
Learn more →Basement Floor Coatings
Coatings for basement slabs, with moisture testing first, for finished basements, laundry rooms and utility spaces.
Learn more →Concrete Crack Repair & Grinding
Crack and spall repair, salt-damage resurfacing, old coating removal and diamond grinding before a new floor.
Learn more →Request a Commercial Floor Estimate
Call or send the form with your town and what's happening.
- Tell us your town and the space: garage, basement or commercial
- Mention cracks, pitting, old paint or coatings, or moisture
- A local installer calls back to confirm availability and a exact pricing
Request a Floor Coating Estimate
Where This Service Is Available
Monroe, NY 10950, Chester, Goshen, Warwick, Woodbury, Central Valley & Harriman, Middletown, Newburgh, New City, Pomona, Suffern, Nanuet, plus Harriman, Highland Mills, Washingtonville, Blooming Grove, Florida, Pine Bush, Montgomery, Walden and nearby communities. All service areas.