Floor coatings across Orange & Rockland Counties, NY  |  Estimates & questions: (845) 653-3873

Epoxy Floor Coatings

Epoxy is the workhorse of floor coatings: thick, hard, chemical-resistant and economical. It works best indoors and away from strong sun.

Exact pricing depends on square footage, slab condition, moisture mitigation, coating system, and prep (grinding, crack repair, old coating removal). Request a free quote after a look at your slab — published per-square-foot ranges can differ from what a local installer charges.

Where Epoxy Shines

Know the Trade-Offs

Epoxy cures slowly compared to polyaspartic, often overnight or longer between coats, and it needs reasonably warm concrete to cure properly. That's one reason epoxy installs in Orange and Rockland are most common from spring through fall, or in heated spaces. Most epoxies also amber (yellow) with UV exposure, so in a garage that gets afternoon sun through an open door, installers often top epoxy with a UV-stable polyaspartic or polyurethane clear coat.

Solid, Flake or Metallic

Solid color

Clean and simple, often for shops and utility spaces. Shows dust more than flake does.

Flake

The classic garage look. Hides dirt and adds texture.

Metallic

A swirled, high-gloss decorative finish for basements and commercial interiors.

What affects the price: professionally installed epoxy quotes depend on prep, thickness and finish, and metallic or specialty finishes take more material and labor. We don't publish prices; ask for a free quote.

Comparing options? See epoxy vs. polyaspartic garage floors.

What Epoxy Is, and Isn't

Epoxy is a two-part coating: a resin and a hardener that react to form a hard, bonded layer. Professional epoxies are typically high-solids or 100%-solids products applied much thicker than the water-based "epoxy paint" sold in many one-day DIY kits. That thickness and the chemistry behind it are what make epoxy durable. It's also why the product on the shelf and a professional system aren't really comparable.

Epoxy's strengths are a strong bond to properly prepared concrete, good build that fills minor imperfections, and a relatively low cost per square foot. Its main weaknesses are that it isn't UV-stable (many epoxies amber or yellow in sunlight), it's slower to cure than polyaspartic, and it's more sensitive to temperature during application.

Epoxy as a Base Coat

Many modern garage systems use epoxy as the base layer and a polyaspartic or urethane topcoat over it. The epoxy provides the bond and the build, and the topcoat provides UV stability, abrasion resistance and chemical resistance. If a garage gets afternoon sun through an open door, or you want a floor that stays clear and bright, ask about a UV-stable topcoat rather than an all-epoxy system.

Where Epoxy Works Well

Cure Times and Planning

Epoxy cures more slowly than polyaspartic, and curing slows further in a cold garage. Typical schedules allow foot traffic after about a day and vehicles after several days, but the right numbers come from the specific products and the slab temperature. Plan around a few days without parking in the garage, and keep the space ventilated during application. Ask the installer for walk-on and drive-on times in writing.

Preparation Still Decides Everything

No epoxy, however good, sticks to a dirty, sealed or damp slab. Diamond grinding to a suitable surface profile (the ICRI CSP scale is the usual reference), crack and spall repair, removal of old coatings and oil contamination, and moisture testing should all happen before the first coat. If an installer quotes epoxy without mentioning preparation, ask how they plan to prepare the floor.

What moves the price: solid-color systems are the simplest, while flake systems with a premium top coat involve more material and steps. Repairs and removing old coatings add work. We don't publish prices; see what affects garage floor coating cost and ask for a free quote.

Caring for an Epoxy Floor

Sources

Epoxy Basics

Epoxy is a two-part system: a resin and a hardener that react to form a hard, durable film. It bonds well to properly prepared concrete and builds thickness, which is why it's often used as a primer or base coat under flake systems. Pure epoxy has two weaknesses for garages: it can yellow (amber) in sunlight because it isn't UV-stable, and it cures slowly at low temperatures. That's why many installers top epoxy with a UV-stable polyaspartic or urethane topcoat.

Water-Based, Solvent-Based and 100% Solids

Store-bought "epoxy" kits are often water-based with low solids, producing a thin film that wears quickly. Professional systems are usually 100% solids or high solids, giving much thicker coats. Solvent-based products release more volatile organic compounds while curing; the EPA notes that VOCs from coatings can affect indoor air, so ventilation matters, especially in attached garages.

Where Epoxy Makes Sense

Cure Time and Temperature

Epoxies typically need warmer slab temperatures and longer cure times than polyaspartics. In cold garages, cure slows down, and applying below the manufacturer's limit risks poor cure or blushing (a waxy surface film). In Hudson Valley winters, epoxy installs are easiest in heated attached garages or during milder months.

Moisture and Epoxy

Epoxy is a vapor barrier. On slabs with high moisture vapor emission, blisters and delamination can follow. Testing by ASTM methods (plastic sheet D4263, relative humidity probes F2170) before coating is the professional standard, and moisture-mitigating epoxy primers exist for slabs that need them.

Epoxy Over Old Coatings

Many Hudson Valley garages already have a layer of paint or an earlier DIY epoxy kit. New epoxy bonds poorly to failing coatings, so the professional approach is to grind it off down to clean concrete. Small, well-bonded areas can sometimes be scuffed and recoated, but if the old coating is peeling anywhere, it is usually peeling elsewhere soon. Ask the installer how they will handle old coatings and whether removal is in the price.

Metallic and Decorative Epoxy

Metallic epoxy floors use pigments that swirl to create a marbled look. They are popular in basements, showrooms and finished garages. They show scratches and dust more than flake systems and need a skilled applicator; ask to see completed work.

Bottom line: epoxy remains a strong, economical choice, especially as a base coat or in basements, as long as the slab is ground, tested and repaired first.

Sources

Questions

Does epoxy turn yellow?

Most epoxies amber with UV exposure. Indoors and in garages kept closed, it's often minor. A UV-stable top coat prevents most of it.

Can epoxy go down in winter?

Epoxy needs the concrete and air within the product's temperature range to cure. In unheated garages that usually means waiting for warmer weather. A heated space can work year-round.

Does epoxy turn yellow?

Many epoxies amber or yellow with UV exposure. A UV-stable topcoat, often polyaspartic or urethane, over the epoxy base helps prevent it.

How long before I can park on a new epoxy floor?

Usually several days, depending on the products and slab temperature. Cold garages slow curing. Get the drive-on time in writing.

Is store-bought epoxy the same as professional epoxy?

Usually not. Many DIY kits are water-based and much thinner than the high-solids or 100%-solids epoxies used in professional systems, and preparation is typically less thorough.

Why did my DIY epoxy peel?

Usually inadequate preparation (no grinding, or acid etching that didn't remove sealers), moisture in the slab, or a thin water-based kit. Hot tires then lift weak spots.

Does epoxy turn yellow?

Many epoxies amber with UV exposure. A UV-stable topcoat prevents that in sunlit garages.

How long does epoxy take to cure?

Often several days before car traffic, longer in cold temperatures. Follow the product's guidance.

Can I apply epoxy myself?

You can, but most DIY failures come from preparation. Rented grinders, proper moisture testing and a 100% solids product improve the odds; store kits applied over acid-etched or sealed concrete often peel.

Related Services

Garage Floor Coatings

Full-broadcast flake systems over ground concrete. Slip-resistant, easy to clean, built for salt and slush.

Learn more →

Polyaspartic Floor Coatings

Fast-curing, UV-stable coatings, often used as one-day garage systems or as a top coat over epoxy.

Learn more →

Basement Floor Coatings

Coatings for basement slabs, with moisture testing first, for finished basements, laundry rooms and utility spaces.

Learn more →

Commercial & Shop Floors

Coatings for auto shops, warehouses, retail, restaurants, offices and showrooms, scheduled around your hours.

Learn more →

Concrete Crack Repair & Grinding

Crack and spall repair, salt-damage resurfacing, old coating removal and diamond grinding before a new floor.

Learn more →

Get an Epoxy Estimate

Call or send the form with your town and what's happening.

  • Tell us your town and the space: garage, basement or commercial
  • Mention cracks, pitting, old paint or coatings, or moisture
  • A local installer calls back to confirm availability and a exact pricing

Call (845) 653-3873

Request a Floor Coating Estimate

Fastest answer: call (845) 653-3873. We only use your details to respond to this request.

Where This Service Is Available

Monroe, NY 10950, Chester, Goshen, Warwick, Woodbury, Central Valley & Harriman, Middletown, Newburgh, New City, Pomona, Suffern, Nanuet, plus Harriman, Highland Mills, Washingtonville, Blooming Grove, Florida, Pine Bush, Montgomery, Walden and nearby communities. All service areas.

Ready for a Floor That Handles Hudson Valley Winters?

Garage, basement or shop, in Orange or Rockland County. Call and a local installer confirms availability.

Call (845) 653-3873
Tap to call — a local installer confirms availability(845) 653-3873